Services

TR CU 004/2011 in TTL

TTL will be pleased to provide services in connection with the verification of your electrical equipment conformity to the requirements of TR CU 004/2011. Our certification body is an exclusive representative in the Eurasian Economic Union. It is properly accredited and included in the Unified Register of Certification Bodies of the Customs Union.

At today's competitive markets consumers prefer to have a reliable evidence of conformity of a product they are going to buy to all regulations and standards. With our conformity verification services, your products will win recognition in the market.

The Technical Regulation on the Safety of Low Voltage Equipment ( TR CU 004/2011 ), was approved by the Customs Union Commission's Decision 768 dated August 16, 2011 and came into effect in February 15, 2013.

Leveraging their extensive experience in conformity assessment, TTL experts can carry out all required procedures in a short time-frame and will work with you through the entire process to getting the certificate of conformity.

With TTL as your partner, you will save time and money, gain your consumers' trust and stand out from your competitors.

This Technical Regulation covers a wide range of sought-after products for both domestic and industrial use. Taking into account rapid technology development in the field of electronic and electric equipment, the TR CU 004/2011 conformity verification is vital.

By complying with the Technical Regulation, you ensure the safety of your low voltage equipment, the adequate level of protection, and exclude unacceptable risks during its operation.

TR CU 004/2011 in Detail

TR CU 004/2011 applies to low voltage equipment to be placed on the market of the Customs Union. The low voltage equipment covered by the Technical Regulation includes electric equipment operating with a rated voltage:

• between 50 and 1000 V for alternating current;

• between 75 and 1500 V for direct current.

The requirements of the Technical Regulation of the Customs Union are intended to ensure protection against one or more risks to human health and safety, and to prevent any confusion or deception of consumers with regard to the equipment safety and intended application.

The Technical Regulation has the following key special aspects:

• Safety requirements can be met directly through compliance with the requirements of the Technical Regulation;

• New safety requirements and standards;

• General list of requirements for operating documents/records;

• General list of equipment that is beyond the scope of the Technical Regulation (even if such equipment falls within the specified voltage range).

Important!

Starting from March 1st, 2018 the Technical Regulation of the Eurasian Economic Union "On the Restriction of the Use of Hazardous Substances in Electrical and Radio-electronic Products" (TR EAEU 037/2016) came into force. The transition period ended on March 1st, 2020. This Regulation harmonized with European Union Directive 2011/65/EU (RoHS 2) (Restriction of Hazardous Substances).

Most of the products which are covered by TR CU 020/2011 "Electromagnetic Compatibility of technical products" and TR CU 004/2011 «On the safety of low-voltage equipment» can also fall under the new Technical Regulation of the Eurasian Economic Union (TR EAEU 037/2016) "On the Restriction of the Use of Hazardous Substances in Electrical and Radio-electronic Products".

Please check the information with TTL WEST specialists.

For more detailed information about Consulting services, please contact us info@ttlwest.uk.

Inquiry form for certification in Russia (TR CU/GOST R)

TR CU 010/2011 in TTL

The TTL certification body is accredited to perform the verification of product conformity to the Technical Regulation of the Customs Union on the Safety of Machinery and Equipment ( TR CU 010/2011 ).

Being one of the leaders in the market of conformity verification services, we are eager to offer you, as our customers, the most beneficial terms of services.

Our cooperation with our customers is built on two principles – a business-school approach and European quality of services provided. TTL certification body will work with you throughout every phase of your product conformity verification process.

TR CU 010/2011 – On the Safety of Machinery and Equipment has been in effect since February 2013. The list of products subject to conformity verification in the form of certification or declaration is provided for in Annex 3.
We will help you to analyze the huge list of equipment and identify the correct definition for your company's products, and provide world-class services of product conformity verification.

60 groups of machinery and equipment used in various industrial sectors are subject to conformity declaration.

The requirements of the Technical Regulation govern all stages of the equipment life cycle in the market of the Eurasian Economic Union. They cover a wide range of aspects: product safety, circulation of machines and equipment in the Customs Union market, rules of identification, conformity assessment procedures and schemes, range of applicants for certification and declaration, specific requirements for agriculture and material-handling equipment.

Leveraging its long experience, extended network of partners, internal top-rank experts and a solid team of dedicated managers, TTL is well-placed to take the strain away from our customers by providing streamlined services. We apply a tailored approach to address the customer's needs in the shortest possible period saving their time and money.

TR CU 010/2011 Certification Procedure for Product Conformity Verification

For more detailed information about Consulting services, please contact us info@ttlwest.uk.

Inquiry form for certification in Russia (TR CU/GOST R)

TR CU 012/2011 in TTL

TTL is pleased to provide services for the compliance conformity of electrical and non-electrical equipment for work in explosive atmospheres according to the requirements of TR CU 012/2011.

Our certification body is an exclusive representative in the Eurasian Economic Union. It has relevant accreditation and is included in the Unified Register of Certification Bodies of the Eurasian Economic Union.

At today's competitive market consumers are looking for reliable confirmation that the products they need are in compliance with all the regulatory requirements. With our conformity assessment services your products will win recognition at the market.

The Technical Regulation of Customs Union «On safety of the equipment for work in explosive atmospheres» TR CU 012/2011 was approved by the Customs Union Commission's Decision 825 dated October 18, 2011 and came into effect in February 15, 2013.

Leveraging their extensive experience in conformity assessment, TTL experts can carry out all required procedures in a short time-frame and will work with you through the entire process of getting the certificate of conformity.

With TTL as your partner, you will save time and money, gain your consumers' trust and stand out from your competitors.

TR CU 012/2011 in Detail

TR CU 012/2011 applies to electrical equipment, including Ex-components and non-electrical equipment intended for work in explosive atmospheres.

The main features of equipment and Ex-components and non-electrical equipment intended for work in explosive atmospheres is the availability of:

• Means of the explosion protection specified in the technical documentation of the producer.

• Explosionproof marking applied to equipment and Ex-components.

The requirements of the Technical Regulation of the Customs Union to equipment intended for work in explosive atmospheres are intended to ensure protection against one or more risks to human health and safety and to prevent any confusion or deception of consumers.

The Technical Regulation has the following key special aspects:

• Confirming compliance with the requirements of TR CU 012/2011 is available in the form of mandatory certification only.

• Apart from Confirming compliance with the requirements of TR CU 012/2011, Explosion-proof equipment could fall within the scope to another Technical Regulations.

• Safety requirements can be ensured by meeting the requirements of the technical regulations directly.

• New safety requirements and standards.

• General list of requirements for operating documents.

For more detailed information about Consulting services, please contact us info@ttlwest.uk.

Inquiry form for certification in Russia (TR CU/GOST R)

TR CU 010/2011 in TTL

TTL certification body's experts are qualified to carry out world-class services of TR CU 016/2011 conformity verification. Benefit from our experience and efficient system of services. We truly value each of our customers and offer a tailored approach based on the customer's needs and situation.

With TTL as their partner, our customers can save their time and money and gain expected results by taking advantage of our experience and expertise and well-established network of partners. We do know and understand our customers, therefore we can work together as a team accommodating your needs and achieving the desired goals.

The Technical Regulation on the Safety of Gas Fired Apparatus ( TR CU 016/2011 ) came into effect in the Customs Union in February 15, 2013. Since that time, gas-fired equipment has been subject to verification for conformity to the said Technical Regulation. Examples of such equipment include:

See the complete list of equipment in Annex 1 to TR CU 016.
TTL has established a streamlined procedure for implementing complicated projects. Our proven track record in performing tasks of various level of complexity sets us apart from our competitors.

The quality and efficiency of TTL services are based on a powerful combination of our highly trained specialists and reliable partners, on the one hand, and our international experience and ability to respond immediately to any changes in the regulations of the Eurasian Economic Union, on the other hand. Our customers can rely on the experience and expertise of TTL experts. We take great pride in our reputation and, therefore, put our customers at the heart of everything we do, which is confirmed by a lot of favorable feedback of our customers.

TR CU 016/2011 Certification Procedure for Product Conformity Verification

For more detailed information about Consulting services, please contact us info@ttlwest.uk.

Inquiry form for certification in Russia (TR CU/GOST R)

TR CU 020/2011 Conformity Verification with TTL as Your Partner

TTL has an exclusive representative in the Eurasian Economic Union, will be pleased to provide services in connection with the verification of your equipment conformity to the requirements of TR CU 020/2011. Our certification body is properly accredited and included into the Unified Register of Certification Bodies of the Customs Union. In today's highly competitive environment, it is the top priority for equipment manufactures all over the world to ensure that the products they place on markets are of proper quality and safe to use.

To achieve this goal, it is important to ensure electrical/electronic equipment has adequate immunity from electromagnetic disturbance generated by the environment it operates in. Furthermore, electromagnetic disturbance generated by such equipment itself should not reach levels which would prevent other equipment from working properly. We can assist in carrying out the assessment of your product conformity to the Technical Regulation of the Customs Union on Electromagnetic Compatibility of Equipment (TR CU 020/2011) approved by the Customs Union Commission's Decision 879 dated December 9, 2011.

TTL is a reliable partner in any area covered by TR CU 020/2011:

TR CU 004/2011 applies to low voltage equipment to be placed on the market of the Customs Union. The low voltage equipment covered by the Technical Regulation includes electric equipment operating with a rated voltage:

• Lighting equipment,

• Automation tools and devices for industrial use,

• Computing equipment,

• Agricultural machines, machines for livestock, poultry and feed production,

• Electrified tools,

• Gardening equipment,

• Electrical household appliances and equipment, etc.

With our comprehensive approach, you will save your costs and time, accelerate the product launch and avoid unacceptable risks connected with placing your products on the Customs Union's market.

Having vast experience in conformity assessment, TTL experts can carry out all required procedures in a short time-frame and will work with you through the entire process to getting the certificate of conformity.

With TTL as your partner, the safety of your equipment will be confirmed with the certificate issued by a well-established recognized organization.

TR CU 020/2011 in Detail

TR CU 020/2011 applies to technical devices:

• that may generate electromagnetic disturbances;

• the performance of which can be affected by exterior electromagnetic disturbances.

The complete list of technical devices subject to mandatory certification in line with the requirements of the Technical Regulation is included in Annex 3 to TR CU 020/2011.

This Technical Regulation does not apply to technical devices that are:

• used by manufacturers of other technical devices as components. Those technical devices are not intended for independent use;

• passive in terms of electromagnetic compatibility;

• not included in the Unified List of Products for which mandatory requirements are set in the Customs Union.

Annex 1 to the Technical Regulation contains a list of technical devices that are passive in terms of electromagnetic compatibility and do not fall under the scope of TR CU 020/2011 – Electromagnetic Compatibility of Equipment.

It should be remembered that if the requirements of any other technical regulations of the Customs Union apply to those technical devices, they are subject to the assessment/verification of the conformity to such applicable technical regulations.

TR CU 010/2011 Certification Procedure for Product Conformity Verification

Important!

Starting from March 1st, 2018 the Technical Regulation of the Eurasian Economic Union "On the Restriction of the Use of Hazardous Substances in Electrical and Radio-electronic Products" (TR EAEU 037/2016) came into force. The transition period ended on March 1st, 2020. This Regulation harmonized with European Union Directive 2011/65/EU (RoHS 2) (Restriction of Hazardous Substances).

Most of the products which are covered by TR CU 020/2011 "Electromagnetic Compatibility of technical products" and TR CU 004/2011 «On the safety of low-voltage equipment» can also fall under the new Technical Regulation of the Eurasian Economic Union (TR EAEU 037/2016) "On the Restriction of the Use of Hazardous Substances in Electrical and Radio-electronic Products".

Please check the information with TTL WEST specialists.

For more detailed information about Consulting services, please contact us info@ttlwest.uk.

Inquiry form for certification in Russia (TR CU/GOST R)

TR CU 031/2012 with TTL

The TTL certification body was among the first certification organizations in the Customs Union accredited to assess/verify the product conformity to the requirements of the Technical Regulation of the Customs Union on the Safety of Agricultural and Forestry Tractors and Trailers ( TR CU 031/2011 ).

Our key advantage — a powerful combination of the world's best practices in conformity assessment and long experience of our partners in machine testing — enables us to offer efficient solutions for product certification as per TR CU 031/2012.

We cooperate with leading testing centers that have all required facilities and highly trained specialists to perform testing of agricultural equipment: Kirov Machine Testing Station, Central Black Soil Region Machine Testing Station, and North Caucasian Machine Testing Station. We also have established close relationships with laboratories in Belarus.

The Technical Regulation sets out a period for transition from previous certificates issued in line with national rules; the transition period expires on March 15, 2017.

Special Aspects of the Technical Regulation:

• The safety requirements set out in TR CU 031/2012 are harmonized with Directive 2003/37/EU and supplemented with the requirements of Russian and Belorussian national standards and the Regulations of the United Nations Economic Commission for Europe (UNECE). However, unlike the Directive that provides for the type approval procedure, the Technical Regulation establishes the product certification procedure.

• The TR sets new requirements, including component-related ones. For example, the required level of the diesel engine emission is Stage IIIA/Tier 3, and from February 2017 it is to be Stage IIIB/Interim Tier 4.

• Tractors and their trailers are classified by category (T, C and R) and type.

• Component type approvals issued as per the UNECE Regulations (adopted at the World Forum WP.29) are accepted as an evidence base.

• The manufacturer is obliged to develop a product specification according to the prescribed form, which must contain information to be included in the annex to the certificate.

TTL is accredited to perform certification of all tractors, their trailers and components subject to certification under TR CU 031/2012. We are committed to providing a full range of high-quality services of conformity assessment quickly and effectively by applying a highly professional 'business-school' approach at every stage of our interaction with the customer.

For more detailed information about Consulting services, please contact us info@ttlwest.uk.

Inquiry form for certification in Russia (TR CU/GOST R)

TR CU 032/2013 with TTL

The TTL certification body is an exclusive representative in the Eurasian Economic Union.

The TTL certification body was among the first certification organizations accredited ) to assess/verify the product conformity to the requirements of the Technical Regulation of the Customs Union on the Safety of Pressure Equipment ( TR CU 032/2011 ), adopted by the Eurasian Economic Commission Board's Decision 41 and effective since February 2014.
Leveraging our vast experience, streamlined relations with testing laboratories, and the proficiency of our top-rank specialists, we have been providing world-class services of TR CU 032/2013 conformity assessment/verification for a number of years.

Our comprehensive approach enables us to deliver tailored services in the shortest time possible. You can rely on the support of our specialists from your first call to TTL and throughout the entire process until the desired goals are achieved.

The conformity verification procedure involves tests and the surveillance of the manufacturer's compliance with legal and regulatory requirements and, therefore, enables you to demonstrate that your high-pressure equipment is safe to use.

Generally, the TR CU 032/2013 requirements apply to the following equipment placed on the market of the Customs Union:

TR CU 032/2013 Certification Procedure for Product Conformity Verification

For more detailed information about Consulting services, please contact us info@ttlwest.uk.

Inquiry form for certification in Russia (TR CU/GOST R)

Fire Safety Certificate

It is well known that each product category is regulated by its own quality standards. The compliance with such standards is the key to the product success. Qualified specialists will help you to overcome any difficulties in the field of regulatory compliance, including fire safety certification.

The Fire Safety Certificate attests the product conformity to the Technical Regulation on Fire Safety (set out by Federal Law No. 123-FZ dated 22.07.2008).

The Fire Safety Certificate can be issued for different product categories subject to such type of conformity assessment. Some of examples include:

How to receive the Fire Safety Certificate?

The Fire Safety Certificate, i.e. the document attesting a product conformity to the requirements of the Technical Regulation, can be issued only after the product has been tested. The Fire Safety Certificate process comprises the following steps:

• to submit a request to TTL;

• to agree upon a scheme and procedure for fire safety certification;

• to determine the cost and deadlines;

• to collect and submit required documents;

• to sign a certification service agreement;

• to analyze the state of the production (depending on the certification scheme);

• to carry out product tests, draw up test protocols (depending on the certification scheme);

• to execute and issue the Certificate of Conformity to Technical Regulation.

The service fee depends on the category of the product to be certified. To be precise, it is calculated based on the following aspects:

• analysis of submitted documents;

• tests of submitted samples;

• inspection of the production (if required for the relevant registration scheme);

• documents release time.

The fire safety certification is a complicated and expensive procedure. The following data are documented in the test protocol:

• emission from toxic substance combustion per mass unit;

• flame spread rate;

• flammability group;

• oxygen intake per mass unit, etc.

The fire safety certification is intended to assess and verify the product safety and is carried out after a properly completed request has been submitted.

The Fire Safety Certificate can be issued with a validity period of 1–3 years. The procedure for Fire Safety Certificate issuance is established by the Federal Agency for Technical Regulation and Metrology. The Fire Safety Certificate can be issued based on the protocol of standard sample testing.

For more detailed information about Consulting services, please contact us info@ttlwest.uk.

Inquiry form for certification in Russia (TR CU/GOST R)

Pressure vessels (receivers, ejectors, heat exchangers, steam condensers, column units, reactors); boiler and direct-fired vessels; pressure equipment parts/components: pipes, fittings (elbows, reducers, tees etc.); pipelines valves (gate valves, valves, faucets/taps, regulators etc.).

Explosion-proof Industrial equipment: explosion-proof lighting equipment; explosion-proof floodlights; explosion-proof control and signaling cabinets; explosion-proof connecting and branching boxes and terminal boxes; explosion-proof rotary switches and control stations; explosion-proof light and sound signaling station, traffic Lights; explosion-proof starters and control devices; explosion-proof converters are electro-pneumatic; explosion-proof conveyor; explosion-proof magnetic sensors; explosion-proof machines and devices for lifting; explosion-proof hoists; explosion-proof local control stations; explosion-proof circuit breakers; explosion-proof electrical connectors; explosion-proof enclosures; explosion-proof cable glands for armored and unarmored cable, pipe laying and cable in metal hose; explosion-proof fittings; explosion-proof fittings and reducing couplings; explosion-proof control boards and cabinets; explosion-proof sensors; explosion-proof crane control unit; explosion-proof electric motors; explosion-proof motors; explosion-proof fans; explosion-proof axial fans; explosion-proof engines; explosion-proof pumps; explosion-proof screw pumps; explosion-proof centrifugal pumps; explosion-proof industrial centrifugal pumps; explosion-proof impeller pumps; explosion-proof submersible pumps; explosion-proof vertical pumps; explosion-proof turbines; explosion-proof turbine flowmeter/liquid turbine flow meter.

Woodworking household machines, agricultural machines; mining equipment; mine belt; conveyors; mining winches; equipment for drilling boreholes; machines for drilling wells in the mining industry; drill rigs; ventilation equipment; ventilator for the underground mines; oxygen compressors; hoisting equipment, hoisting cranes; turbines and gas turbine units; turbines; crushers; diesel generators; conveyors; electric wire rope hoists; chemical, oil and gas processing equipment; equipment for the processing of polymeric materials; pumping equipment (pumps, units and pumping units); screw pumps; centrifugal pumps; industrial centrifugal pumps; impeller pumps; submersible pumps; vertical pumps; cryogenic, compressor, refrigeration, autogenous, gas-purifying equipment: air separation and rare gas plants apparatus for the preparation and purification of gases and liquids heat and mas transfer equipment of cryogenic systems and installations; compressors (air and gas driven); turbocompressor/turbochargers parts of pumps and compressors; turbochargers; refrigeration units; equipment for gas-flame processing of metals and metallization of products; gas cleaning and dust removal equipment; pulp and paper equipment; oilfield equipment, exploration drilling; liquid ammonia equipment; equipment for the preparation and purification of drinking water; metalworking machines; forging machines; woodworking equipment; technological equipment for foundry; industrial tractors; industrial fans; air heaters and air coolers; technological equipment for consumer industry; heating boilers operating on liquid and solid fuels; gas and combined burners; industrial pipe fittings.

The low-voltage equipment covered by this technical regulation of the Customs Union includes electrical equipment intended for use at rated voltage from 50 to 1000 V (inclusive) of alternating current and from 75 to 1500 V (inclusive) of direct current. Electrical apparatus; personal electronic computers; low-voltage equipment connected to personal electronic computers; tool electric power (manual and portable electric equipment); cables, wires and cords; automatic switches; apparatuses for allocation of electric energy; electric control devices for electrotechnical installations; lighting equipment; wiring accessories; floodlights; apparatuses for allocation of electric energy; electric apparatus for controlling electrical installations; electric and electromechanical apparatus for electrical installations; cables; industrial electrical connectors; light indicators; thermostats; control cabinets; automated process control system (APCS).

Electrical equipment and appliances household purpose; personal electronic computers; technical means connected to personal electronic computers; electrified tools; electric pumps; lighting equipment; automatic switches with electronic control; protective devices with electronic control; power units, battery chargers, voltage stabilizers; electromotors; etc.

A technical passport is a document required by Russian Federation authorities for most of the technological equipment and shall be issued in Russian language.
A technical passport, when required by a TR CU, shall be completed before the issuing of a CoC/DoC.
A technical passport is an operating and maintenance document which accompanies the equipment during its service lifetime.
It contains design data, fabrication data and records, preservation certificates – whenever applicable – as well as operating and maintenance instructions.
From installation on site, a technical passport is used as a logbook and as such also contains pre-formatted pages for maintenance records and tracking of works carried out on equipment and material on site.
For some kinds of equipment, e.g. electrical, a technical passport can be excluded from the set of documents, if all the relevant information is present in the operating manual.
A technical passport shall be prepared by the manufacturer in accordance with requirements of the corresponding TR CU, GOST 2.601-2013 and GOST 2.601-2019, “Unified system for design documentation. Exploitative documents” and GOST 2.610-2006 and GOST 2.610-2019 “Unified system for design documentation. Rules for making exploitative documents”, as a minimum.

Technical passports for some types of equipment, with standards:

• Pressure Vessels (based on CU TR 032/2013, GOST 34347-2017)
• Non-Pressure Vessels (based on PB 03-584-03 – in parts not contradicting TR CU 032/2013, GOST 34347-2017)
• Compressor Package (based on GOST 2.601-2013, GOST 2.610-2006)
• Burner and Flare (based on GOST 2.601-2013, GOST 2.610-2006)
• Cranes and Lifting Device (based on RTN Order 533, GOST 34022-2016)
• Air Cooler Heat Exchanger (based on GOST R 51364.99)
• Pipeline (based on TR CU 032/2013, GOST R 32569-2013 and RTN Order 784)
• Steam and Hot Water Pipeline (based on GOST R 32569-2013 and RTN Order 116)
• Package (based on GOST 2.610-2006)
• Diesel Generator (based on GOST 2.601-2013, GOST R 53174-2008)
• Voltage Transformer (based on GOST R 52719-2007)
• LV Switchboard (based on GOST 2.601-2013, GOST R 51321.1-2007)
• HV Switchboard (based on GOST 2.601-2013, GOST R 54828-2011)
• Safety Valve (based on GOST R 32569-2013 and ЦKБA 031-2015, CU TR 032/2013 if applicable)
• Control and On-Off Valve (GOST R 32569-2013 and ЦKБA 031-2015, CU TR 032/2013 if applicable)
• Manual Valve (based on GOST R 32569-2013 and ЦKБA 031-2015, CU TR 032/2013 if applicable)
• Fan (based on GOST 2.601-2013, GOST 2.610-2006)
• Pump (based on GOST 2.601-2013, GOST 2.610-2006)
• Motor (based on GOST 2.601-2013, GOST 31606-2012)
• VSDS (based on GOST 2.601-2013, GOST R IEC 61800-2-2012)
• Measuring Instrument (based on GOST 2.610-2006)

In accordance with the Order of the Ministry of Economic Development of the Russian Federation dated July 31, 2020 No. 478 "On establishment of the Procedure for registration of Declarations of conformity TR CU* and the Procedure for the formation and maintenance of a unified register of registered declarations of conformity, provision of information contained in the specified register", from January 1, 2021, registration of Declarations of conformity TR CU (hereinafter - the Declaration ) will be carried out by the Federal Accreditation Service.

When registering a Declaration, information and documents certified by the electronic digital signature of the Applicant are transferred to the unified register, while the information provided is verified by the Federal Accreditation Service.

The Declaration is considered accepted from the moment of its registration in the unified register.

Possible reasons for refusal to register a declaration are non-compliance by the applicant with the established requirements for form of the declaration, submission of documents and information not in full, and others.

Our company offers services for the preparation of a set of documents that meet the established requirements for the successful self-registration of the declaration by the Applicant**. We are also ready to provide a full range of services for project follow-up and registering the declaration in the unified register of the Federal Accreditation Service. Including the Applicant service on the territory of the Eurasian Economic Union (Russia, Kazakhstan, Belarus etc..).

Declarations of conformity* is a document in which the manufacturer certifies that the products supplied by him meet the requirements of regulatory documents.

The Applicant** can only be a legal entity registered in the territory of the Eurasian Economic Union in accordance with its legislation or an individual as an individual entrepreneur, who is a seller, or a person authorized by the manufacturer. The Applicant assumes full legal responsibility for the quality of the products.

The area of accreditation of the TTL Consulting West includes various types of equipment (chemical, petrochemical, oil and gas processing, oxygen, cryogenic, drilling, oil and gas production, gas cleaning, dust collecting, pulp and paper, technological equipment for food industry enterprises).